Height Sensors

New Right Rear Height Sensor Extension being lined up for installation. These are the extensions supplied by Rover Renovations.

If you look closely, you will notice that my height sensor already has an extension in the form of a teflon tube.

The point of this page is to show that you have options for extending the height sensors if you need to.

The only valid reason to extend the height sensors is because you have installed a lift kit that raises the suspension.

A common misconception is that by installing Arnott Gen III Air Springs, you get an extra 2″/50mm of lift and should extend the height sensors.

I strongly advise against raising EAS height and extending height sensors unless you are also installing a lift kit, as all you are really doing is losing articulation ability.